PVC corner bead with fiberglass mesh

PVC CORNER BEAD WITH REINFORCING MESH 10X15

  • Maximum impact protection of the exterior corners.
  • Can be used at different heights compatible with the standard corner PVC shape.

WINDOW PVC BEAD WITH REINFORCING MESH

  • Self-adhesive PVC shape; includes fiberglass for precise bordering of window opening slopes, for installation in heat insulation systems.
  • Bordering shape for sealed window openings adjusts to the motion in the slope and has a reinforcing mesh.
  • Clean the surface of the wall and window frame before installation.
  • Has a tear-off adhesive strip to protect windows during plastering work.

DROPPER PVC BEAD WITH REINFORCING MESH

  • A perfect way to complete the upper slope of the window opening.
  • Shields the window from water drops during rain.
  • Protects the insulation layer from absorbing rain moisture.

BASIC PVC BEAD WITH REINFORCING NET

  • Basic PVC shape with the reinforcing net for attachment to the base shape.
  • Ensures strong contact between plaster and the base shape. Prevents plaster peeling and cracking at the facade bottom.

RUSTICATION PVC PROFILE

Used for rust decoration on facades.

RUSTICATION PVC PROFILE WITH MESH

Used for rust decoration on facades.

EXPANSION V-SHAPED PVC BEAD

Expansion PVC beadwith a reinforcing mesh is used for finishing thermodynamic joints of facades and in installation of plaster-type heat insulation systems. Used for finishing of V-shaped (corner) expansion joints of buildings.

EXPANSION E-SHAPED PVC BEAD

Expansion PVC bead with a reinforcing mesh is used for finishing thermodynamic joints of facades and in installation of plaster-type heat insulation systems. Used for finishing of plane (E-shaped) expansion joints of buildings.

BASIC PVC/ALUMINUM BEAD

Used as a basic support bar of heat insulation boards in plaster-type facade heat insulation systems. Installed horizontally, along the perimeter of the building, with a special mounting kit (dowel, connector, compensator). The shape assumes the load of insulation boards, promotes removal of moisture from the system, and does not require plaster of the hard-to-reach lower edge of the insulation board.
 

* minimum temperature for installation of window slope bordering shapes is +0 °C.